LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1992 >> Impulse XS, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [4,5,6] & 1.8L 4-CYL - VIN [8] >> Overhaul >> Piston & Rod Assembly

Piston & Rod Assembly

Ensure piston is installed in cylinder block with front mark area on top of piston toward timing belt end of engine. See Fig 1 . Ensure piston is installed on connecting rod so front mark at center of connecting rod aligns with front mark on top of piston.

Fig 1: Aligning Piston & Connecting Rod (1.6L DOHC Shown; 1.8L DOHC Markings Similar)
G91J00470Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals