LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1992 >> Impulse XS, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [4,5,6] & 1.8L 4-CYL - VIN [8] >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

  1. To reassemble, reverse disassembly procedure. Install oil seal using Seal Installer (J-35269). Tighten oil pump cover bolts to specification. See TORQUE SPECIFICATIONS  .
  2. To install, reverse removal procedure. Apply Sealant (TB-1207B) to oil pump gasket surface before installing oil pump. Tighten all bolts to specification.
scientia non olet · About LEMON Manuals