LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1991 >> Rodeo LS, RWD, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.8L V6 - VIN [R] & 3.1L - VIN [Z] >> Removal & Installation >> Front Cover Oil Seal (3.1L) >> Removal

Front Cover Oil Seal (3.1L): Removal

  1. Disconnect negative battery cable. Remove radiator undercover. Remove accessory drive belt. Remove suspension crossmember. Remove starter. Remove flywheel cover. Insert a prybar into flywheel to prevent engine rotation. Remove pulley from vibration damper. Remove vibration damper bolt.
  2. Using Puller (J-24420-B), remove vibration damper. Carefully pry seal from front cover. DO NOT damage sealing surface.
scientia non olet · About LEMON Manuals