LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1991 >> Rodeo LS, RWD, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.8L V6 - VIN [R] & 3.1L - VIN [Z] >> Removal & Installation >> Front Cover Oil Seal (2.8L) >> Removal

Front Cover Oil Seal (2.8L): Removal

  1. Disconnect negative battery cable. Remove accessory belt. Remove crankshaft pulley from vibration damper. Remove vibration damper bolt.
  2. Using Puller (J-23523-E or J-24420-B), remove vibration damper. Carefully pry seal from front cover. DO NOT damage sealing surface.
scientia non olet · About LEMON Manuals