LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1991 >> Rodeo LS, RWD, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.8L V6 - VIN [R] & 3.1L - VIN [Z] >> Removal & Installation >> Front Cover Oil Seal (2.8L) >> Installation

Front Cover Oil Seal (2.8L): Installation

  1. Using Seal Installer (J-35468), install seal in front cover. Install seal with open end of seal toward the inside of front cover. Lubricate seal lip with engine oil.
  2. Lubricate vibration damper-to-seal contact surface with engine oil. Using Vibration Damper Installer (J-29113), install vibration damper. Install retaining bolt and tighten to specification. See TORQUE SPECIFICATIONS  . To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals