LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1989 >> I-Mark LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [7] & 1.5L 4-CYL Turbo - VIN [9] >> Removal & Installation >> Timing Belt & Sprockets >> Installation

Timing Belt & Sprockets: Installation

  1. Ensure camshaft pulley mark is aligned with upper surface of head and dowel pin is at 12 o'clock position. Ensure Woodruff key of crankshaft is in 12 o'clock position. Install timing belt.
  2. Tighten tensioner bolt, and rotate crankshaft 2 revolutions. Check timing marks. Loosen tensioner bolt and remove slack from timing belt. There must be no slack in the belt after it has been installed. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals