Cylinder Block Specifications
CYLINDER BLOCK SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Maximum Block Warp | .008 (.20) | |
| Cylinder Bore | ||
| Standard Diameter | See Figure | |
| Maximum Out-of-Round | n/a | |
| Maximum Taper | n/a | |
| Application | In. (mm) | |
|---|---|---|
| Maximum Block Warp | .008 (.20) | |
| Cylinder Bore | ||
| Standard Diameter | See Figure | |
| Maximum Out-of-Round | n/a | |
| Maximum Taper | n/a | |