LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1988 >> Trooper II Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.3L 4-CYL - VIN [L] & 2.6L 4-CYL - VIN [E] >> Removal & Installation >> Rocker Arm Shaft Assembly >> Installation

Rocker Arm Shaft Assembly: Installation

  1. Reassemble rocker arm shaft components in original positions using an ample amount of oil. Longer rocker shaft must be installed on exhaust side. Punch marks on rocker arm shafts must be positioned at front of engine and pointing upward.
  2. Coat rocker arm shaft, rocker arms and valve stems with engine oil. Install rocker arm shaft assembly on cylinder head. Apply silicone gasket material to No. 1 rocker arm bracket mounting surface on cylinder head.
  3. Starting with inner nuts and working outward, tighten brackets in progressive steps. See Figure. Adjust valve clearance and install valve cover.
scientia non olet · About LEMON Manuals