LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1988 >> Trooper II Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.3L 4-CYL - VIN [L] & 2.6L 4-CYL - VIN [E] >> Removal & Installation >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. Remove cylinder head and oil pan. Check connecting rods and caps for cylinder identification. Place rod and cap identification marks on starter side of engine. Remove carbon deposits or ridge from upper part of cylinder wall.
  2. Remove connecting rod caps. Cover rod bolt ends to prevent crankshaft rod journal damage. Push piston and connecting rod out top of engine block.
scientia non olet · About LEMON Manuals