LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1988 >> I-Mark Base, 2D Hatchback, 1.5 7, Automatic >> Labor Times >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All,w/Rear Disc Brakes,Both Axles1.8B
All,w/Rear Drum Brakes,Both Axles2.2B
Front,Both Sides1.0B
Rear,w/Disc Brakes,Both Sides1.0B
Rear,w/Drum Brakes,Both Sides1.4B
Combination Procedure: AXLE OR WHEEL BEARING: Repack:
FWD, Both Sides,Rear0.4B
Combination Procedure: AXLE OR WHEEL BEARING: Replace:
FWD, One Side,Rear0.1B
Combination Procedure: BRAKE HOSE: Replace:
Each Additional0.2B
One0.3B
Combination Procedure: CALIPER: Overhaul:
w/o ABS,OneIncludes: Bleed Brakes.0.5B
Combination Procedure: CALIPER: Replace:
w/o ABS,OneIncludes: Bleed Brakes.0.3B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Both Sides0.6B
Combination Procedure: WHEEL CYLINDER: Overhaul:
w/o ABS,One,Off VehicleIncludes: Bleed Brakes.0.5B
w/o ABS,One,On VehicleIncludes: Bleed Brakes.0.3B
Combination Procedure: WHEEL CYLINDER: Replace:
w/o ABS,OneIncludes: Bleed Brakes.0.3B