LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1985 >> Impulse 2.0 F, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B], 1.9L 4-CYL [A], 2.0L 4-CYL [F] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. Apply heavy coat of engine oil to camshaft journals and bearing surfaces. Install camshaft and rocker arm shaft brackets so that mark on camshaft thrust flange is aligned with mark on No. 1 rocker arm shaft bracket. Check that crankshaft pulley mark is aligned with TDC mark on front cover.
  2. Reverse removal procedure to complete installation. Check valve timing by ensuring that rotor and mark on distributor housing are aligned when No. 4 cylinder is in firing position. Check that crankshaft pulley mark is aligned with TDC mark on front cover.
scientia non olet · About LEMON Manuals