LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1985 >> Impulse 2.0 F, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B], 1.9L 4-CYL [A], 2.0L 4-CYL [F] >> Overhaul >> Piston Pin Replacement >> Installation

Piston Pin Replacement: Installation

  1. Check oil jet on connecting rod for obstructions and clean as necessary. On I-Mark, assemble connecting rod to piston with chamfer on rod's small end on same side as front mark on piston head. See Fig 1 .
  2. On all other models, assemble connecting rod so that front mark on piston and "ISUZU" stamp on connecting rod are on same side. Lightly oil pin bores in piston and rod. Press pin into piston and rod.
Fig 1: I-Mark Piston-To-Rod Relationship
G81930
NOTE: Note position of bearing recesses.
scientia non olet · About LEMON Manuals