LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1985 >> Impulse 2.0 F, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B], 1.9L 4-CYL [A], 2.0L 4-CYL [F] >> Overhaul >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. Remove cylinder head and oil pan. Mark connecting rods and caps (on starter side of engine) for cylinder identification. Remove carbon deposits or ridge from upper part of cylinder wall.
  2. Remove connecting rod caps and install a piece of hose over rod bolts. Using a wooden hammer handle, carefully push piston and connecting rod out top of engine block.
scientia non olet · About LEMON Manuals