LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1985 >> I-Mark 4D Hatchback, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear (Fwd) >> Removal & Installation >> Wheel Bearing >> Installation

Wheel Bearing: Installation

  1. Using Inner Bearing Race Installer (J-35307-1), install inner bearing race. Using Outer Bearing Race Installer (J-35307-2), install outer bearing race. Use a multipurpose grease to lubricate bearings, and install inner bearing.
  2. Using Seal Installer (J-35305), install new oil seal in the inner side of hub. Install hub and drum. Install outer bearing, washer, hub nut, cotter pin and dust cap. Tighten to specifications.
scientia non olet · About LEMON Manuals