Disc Brake Rotor & Hub: Installation

Temporarily install rotor on hub. Insert spacer into hub. Using a plastic hammer, drive hub in until center protrudes evenly. See Fig 1 .

Fig 1: Installing Spacer on Wheel Hub
Using Wheel Hub Install (J 34856) and Handle (J 7079 2), drive hub and rotor assembly on drive axle until dimension "A: is reached. See Figure .
Install and tighten bolts attaching hub to rotor and hub castle nut. Install cotter pin. Install pads and caliper and tighten caliper mounting bolts.

Fig 2: Installing Front Hub Assembly