LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1985 >> I-Mark 4D Hatchback, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Master Cylinder >> Diassembly

Master Cylinder: Diassembly

  1. Drain fluid and remove reservoir. Remove snap ring from end of cylinder. Apply low pressure compressed air to rear reservoir port and force out primary piston.
  2. Remove secondary piston by removing piston stop bolt from bottom of master cylinder and applying low pressure compressed air in stop bolt hole.
scientia non olet · About LEMON Manuals