LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1984 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B] & 1.95L 4-CYL - VIN [A] >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

Disconnect negative battery cable. Drain cooling system. Disconnect radiator hoses and remove radiator. Remove all drive belts. Remove fan. Remove vibration damper assembly. Using a screwdriver, carefully pry seal out of front cover.