LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1984 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B] & 1.95L 4-CYL - VIN [A] >> Removal & Installation >> Cylinder Head >> Removal (Impulse, P'UP & Trooper II)

Removal (Impulse, P'UP & Trooper II)

  1. Remove valve cover, gasket and front plug. Remove camshaft sprocket bolt, leave timing chain between chain guide and chain tensioner. Insert a screwdriver along right side of chain and depress tensioner lock lever rearward.
  2. Push in on tensioner adjustment shoe and lock it in retracted position by releasing lever. Starting with outer nuts and working inward, loosen camshaft brackets. Remove camshaft brackets and nuts.
  3. Remove cylinder head-to-front cover bolts. Starting with outer bolts and working inward, loosen cylinder head bolts using Head Bolt Wrench (J-24239-01). Remove cylinder head and gasket.
scientia non olet · About LEMON Manuals