LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1984 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B] & 1.95L 4-CYL - VIN [A] >> Engine Specifications >> Pistons, Pins & Rings Specifications

Pistons, Pins & Rings Specifications

PISTONS, PINS & RINGS SPECIFICATIONS

Application In. (mm)
1.8L
Pistons
Clearance .0018-.0026 (.045-.065)
Pins
Piston Fit (1) .0002-.0004 (.006-.011)
Rod Fit .0012-.0016 (.030-.041)
Rings
Ring No. 1 & 2
End Gap .012-.018 (.30-.45)
Side Clearance (2) .0010-.0024 (.025-.060)
Ring No. Oil
End Gap .008-.035 (.20-.90)
Side Clearance .0008 (.02)
1.95L
Pistons
Clearance .0018-.0026 (.045-.065)
Pins
Piston Fit (1) .0002-.0004 (.006-.011)
Rod Fit .0012-.0016 (.030-.041)
Rings
Ring No. 1 & 2
End Gap .012-.020 (.35-.50)
Side Clearance (2) .0010-.0024 (.025-.060)
Ring No. Oil
End Gap .008-.035 (.20-.90)
Side Clearance .0008 (.02)
(1) Maximum clearance between piston pin and piston is 0.0016" (.041 mm).
(2) Maximum ring side clearance .006" (.15 mm).
scientia non olet · About LEMON Manuals