LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B],1.9L [A], 1.95L 4-CYL - VIN [A] >> Engine Lubrication >> Water Pump >> Removal

Water Pump: Removal

  1. Disconnect negative battery cable. Remove lower cover and drain cooling system. On models without A/C, remove fan. Remove water pump.
  2. If A/C equipped, remove fan and air pump drive belt. Remove fan, fan pulley, and air pump drive pulley. Remove fan set plate and pulley. Remove water pump.