LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B],1.9L [A], 1.95L 4-CYL - VIN [A] >> Engine Identification >> Valve Guides >> Installation

Valve Guides: Installation

  1. Lubricate outside of new guide with engine oil. Working from top side of head, use valve guide driver tool (J-26512) to drive new guide into place until tool bottoms on cylinder head.
  2. This should place valve guide at .634-.642" (16.10-16.30 mm) above cylinder head surface. Install lower spring seat and remaining valve components.
scientia non olet · About LEMON Manuals