LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B],1.9L [A], 1.95L 4-CYL - VIN [A] >> Engine Identification >> Piston Pin Replacement >> Installation

Piston Pin Replacement: Installation

  1. On I-Mark and P'UP models, assemble connecting rod to piston with chamfer on rod's small end on same side as front mark on piston head. See Fig 1 .
  2. On Impulse models, assemble connecting rod so that front mark on piston and "Isuzu" stamp on connecting rod are on the same side. Lightly oil pin bores in piston and rod. Press pin into piston and rod.
Fig 1: I-Mark & P'UP Piston-to-Rod Relationship
G81930
NOTE: Note position of bearing recesses.
scientia non olet · About LEMON Manuals