LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B],1.9L [A], 1.95L 4-CYL - VIN [A] >> Engine Identification >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. Remove cylinder head and oil pan. Mark connecting rods and caps (on starter side of engine) for cylinder identification. Remove carbon deposits from upper part of cylinder wall.
  2. Remove connecting rod caps. Using a wooden hammer handle, carefully push piston and connecting rod out top of cylinder block.
scientia non olet · About LEMON Manuals