LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B],1.9L [A], 1.95L 4-CYL - VIN [A] >> Engine Identification >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

  1. Disconnect negative battery cable. Drain cooling system. Disconnect radiator hoses and remove radiator.
  2. Remove all drive belts. Remove fan. Remove vibration damper assembly. Using a screwdriver, carefully pry seal out of front cover.
scientia non olet · About LEMON Manuals