LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B],1.9L [A], 1.95L 4-CYL - VIN [A] >> Engine Identification >> Exhaust Manifold >> Removal

Exhaust Manifold: Removal

  1. Disconnect battery ground cable. Remove EGR pipe clamp bolt at rear of cylinder head. Remove EGR pipe from manifolds. Disconnect exhaust pipe support brackets. Disconnect exhaust pipe from manifold.
  2. Remove exhaust manifold heat shield and heat stove tube. If equipped, disconnect oxygen sensor wire at exhaust manifold. Remove exhaust manifold.
scientia non olet · About LEMON Manuals