LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B],1.9L [A], 1.95L 4-CYL - VIN [A] >> Engine Identification >> Camshaft >> Installation

Engine Identification: Camshaft: Installation

  1. Apply heavy coat of engine oil to camshaft journals and cylinder head bearing surfaces. Install camshaft in place. Position camshaft so mark on camshaft thrust flange is aligned with mark on No. 1 rocker arm shaft bracket.
  2. Check that crankshaft pulley mark is aligned with TDC mark on front cover. Install remaining components in reverse order of removal. Ensure valve timing is correct.
scientia non olet · About LEMON Manuals