LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B],1.9L [A], 1.95L 4-CYL - VIN [A] >> Engine Identification >> Camshaft End Thrust

Camshaft End Thrust

  1. Remove rocker arm shaft assembly to relieve load on camshaft. With camshaft positioned in cylinder head, measure camshaft end play using a dial indicator.
  2. Standard end play is .002-.006" (.05-.15 mm). If end play exceeds .008" (.20 mm), check camshaft thrust flange or thrust groove in head for wear. Replace worn components.
scientia non olet · About LEMON Manuals