LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Component Testing >> Voltmeter >> P'Up

Component Testing: Voltmeter: P'Up

Apply 12 volts to terminals 2 and 6 of voltmeter connector. SeeFig 1 . If voltmeter indicates a voltage of 11-13 volts, it is okay. If outside specified range, replace voltmeter.

Fig 1: P'UP Voltmeter Connector Terminal Locations Viewed from meter side.
G29766
scientia non olet · About LEMON Manuals