LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Component Testing >> Temperature Gauge >> I-Mark & Impulse

I-Mark & Impulse

Using ohmmeter, check resistances across lettered terminals as listed in chart. SeeFig 1 . If resistances are not correct, replace gauge.

TEMPERATURE GAUGE RESISTANCES - I-MARK

Terminal Position Ohms
IG-U 90
IG-E 248
U-E 158
TEMPERATURE GAUGE RESISTANCES - IMPULSE

Terminal Position Ohms
IG-U 88
IG-E 197
U-E 109
Fig 1: Temperature Gauge Terminal Locations Impulse shown. I-Mark locations not available from manufacturer.
G29762
scientia non olet · About LEMON Manuals