Wheel Seal: Remove & Replace
WARNING: This page is about the Scout II 3.2L Eng, 4WD, which is a different variant/trim than selected.
Includes: Repack and adjust Bearings and replace Seals on Full Floating Axles.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Both,Full Floating Axle | 1.8 | B | ||
| Both,Semi-Floating Axle | 3.5 | B | ||
| One Side,Full Floating Axle | 1.0 | B | ||
| One Side,Semi-Floating Axle | 1.9 | B | ||
| Combination Procedure: OIL SEAL WEAR SLEEVE: Remove & Replace: | ||||
| Each | 0.2 | B | ||