Wheel Cylinder: Remove, Install, and Overhaul

Includes: Repack Wheel Bearings (where applicable), bleed System and replace Shoes (if necessary).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
4WD, One Cylinder Per Wheel,Both,Front		2.8		B
4WD, One Cylinder Per Wheel,One Side,Front		1.5		B
Additional Cylinder,Each		0.4		B
One Cylinder Per Wheel,Rear,Both,Full Floating Axle		2.8		B
One Cylinder Per Wheel,Rear,Both,Semi-Floating Axle		2.2		B
One Cylinder Per Wheel,Rear,One Side,Full Floating Axle		1.5		B
One Cylinder Per Wheel,Rear,One Side,Semi-Floating Axle		1.2		B
Combination Procedure: OIL SEAL WEAR SLEEVE: Replace:
Each		0.2		B