LEMON Manuals: Even more car manuals for everyone
Home >> International >> 1971 >> M800 5.0L Eng, _NA_ >> Repair and Diagnosis >> Steering >> Power Steering >> Manual Steering Gears - (GEMMER/ROSS) Worm & Roller >> Overhaul >> Reassembly

Manual Steering Gears - (GEMMER/ROSS) Worm & Roller: Overhaul: Reassembly

  1. Install sector shaft bearing or bushing if removed. Install upper bearing and retainer assembly on worm gear. Install oil seals if removed. Install upper bearing cup and worm gear in housing. Install lower bearing assembly over worm gear assembly and insert lower bearing cup. Install shims and top cover to housing. Check worm bearing preload. See ADJUSTMENTS .
  2. Install sector shaft assembly into housing. Install side cover and gasket on housing. Adjust worm and roller mesh preload. See ADJUSTMENTS .
scientia non olet · About LEMON Manuals