All Models (1965-73)

Three different light switches are used depending on how each vehicle is equipped with fuses or circuit breakers.

Fig 1: LIGHT SWITCH (LESS FUSE, WITH CIRCUIT BREAKER)

Courtesy of NOT AVAILABLE

1. Headlight switch (less fuse, equipped with circuit breaker). To remove, pull light switch out to "ON" position, loosen Allen screw in knob and remove knob from shaft. Remove ferrule nut, disconnect all wires from switch noting positions for reinstallation. Remove switch.
   Fig 2: LIGHT SWITCH (LESS FUSE AND CIRCUIT BREAKER)

   Courtesy of NOT AVAILABLE
2. Light switch (less fuse and circuit breaker). To remove, pull headlight knob out to "ON" position, depress shaft release button on switch body and pull knob and shaft out of switch body. Remove ferrule nut and disconnect all wires from light switch noting proper positions for reinstallation.
   Fig 3: LIGHT SWITCH (WITH FUSE AND CIRCUIT BREAKER)

   Courtesy of NOT AVAILABLE
3. Light switch (with fuse and circuit breaker). Follow same procedure given for light switch less fuse and circuit breaker.