DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | |
| P2768 | INPUT SPEED SENSOR B(Input/Turbine Shaft Speed Sensor "B" Circuit Intermittent) | Diagnosis condition | TCM power supply voltage: More than 11 V |
| Signal | - | ||
| Threshold | Secondary pulley speed: more than 16212 rpm | ||
| Diagnosis delay time | Maintained 2 seconds | ||
POSSIBLE CAUSE
- Harness or connector (Output speed sensor circuit is open or shorted)
- Output speed sensor
- TCM
FAIL-SAFE
- Start is slow
- Acceleration is slow
- Lock-up is not performed
- Manual mode is not activated