DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| P0701 | 00 | Transmission control system(Transmission Control System Range/Performance) | Diagnosis condition | When the ignition switch is ON |
| Signal | CAN communication signal | |||
| Threshold | Electric shift control module detects that the transmission range switch signal is OFF. | |||
| Diagnosis delay time | - | |||
POSSIBLE CAUSE
- Battery
- Harness or connectors (Transmission range switch circuit is open or shorted.)
- TCM
- CVT assembly
- Shift actuator
- Calibration data are not written in TCM
FAIL-SAFE
No impact to vehicle behavior