DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | |
| U0300 | CAN COMM DATA(Internal Control Module Software Incompatibility) | Diagnosis condition | When the ignition switch is ON |
| Signal | CAN communication data | ||
| Threshold | The data length transmitted from each control unit is shorter than the specified length and the status | ||
| Diagnosis delay time | Continues for 2 seconds or more | ||
POSSIBLE CAUSE
Control unit other than TCM
FAIL-SAFE
- Selector shock is large
- Start is slow
- Acceleration is slow
- Lock-up is not performed