DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | ||
| P0965 | PC SOLENOID B(Pressure Control Solenoid B Control Circuit Range Performance) | 1 | Diagnosis condition | When all of the following conditions are satisfied:
|
| Signal | - | |||
| Threshold | When all of the following conditions are satisfied and this state is maintained for 1 second:
|
|||
| Diagnosis delay time | Maintained for 10 seconds | |||
| 2 | Diagnosis condition | When all of the following conditions are satisfied:
|
||
| Signal | - | |||
| Threshold | When all of the following conditions are satisfied and this state is maintained for 5.5 seconds:
|
|||
| Diagnosis delay time | Maintained for 10 seconds | |||
POSSIBLE CAUSE
- Harness or connector (Primary pressure solenoid valve circuit is open or shorted)
- Primary pressure solenoid valve
FAIL-SAFE
- When a malfunction occurs on the low oil pressure side
- Selector shock is large
- Start is slow
- Acceleration is slow
- Lock-up is not performed
- When a malfunction occurs on the high oil pressure side
- Selector shock is large
- Lock-up is not performed