DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | |
| P0963 | PC SOLENOID A(Pressure Control Solenoid A Control Circuit High) | Diagnosis condition | When all of the following conditions are satisfied:
|
| Signal | - | ||
| Threshold | TCM judges that solenoid valve circuit is open | ||
| Diagnosis delay time | Maintained for 1 second | ||
POSSIBLE CAUSE
- Harness or connector (Line pressure solenoid valve circuit is open or shorted to power supply)
- Line pressure solenoid valve
FAIL-SAFE
- Selector shock is large
- Start is slow
- Acceleration is slow
- Lock-up is not performed