DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | |
| P0914 | Gear shift positionGear Shift Position Circuit | Diagnosis condition | When the ignition switch is ON |
| Signal | CAN communication signal | ||
| Threshold | TCM is unable to receive the CAN communications signal from electric shift control module | ||
| Diagnosis delay time | Continuously for 90 seconds or more | ||
POSSIBLE CAUSE
- Electric shift control module
- Harness or connector (CAN communication line is open or shorted)
FAIL-SAFE
It becomes the same fail-safe as the DTC (P0604, P0605, P0606, P0607, P060C, P062F and/or P06B1) detected by the electric shift control module. Refer to Fail-safe .