DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | |
| P0718 | INPUT SPEED SENSOR A(Input/Turbine Shaft Speed Sensor "A" Circuit Intermittent) | Diagnosis condition | TCM power supply voltage: More than 11 V |
| Signal | - | ||
| Threshold | Input speed: more than 7750 rpm | ||
| Diagnosis delay time | Maintained for 2 seconds or more | ||
POSSIBLE CAUSE
- Harness or connector (Input speed sensor circuit is open or shorted)
- Input speed sensor
- TCM
FAIL-SAFE
- Start is slow
- Acceleration is slow
- Lock-up is not performed