DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms(Trouble diagnosis content) | DTC detection condition | |
| P0706 | T/M RANGE SENSOR A(Transmission Range Sensor A Circuit Range/Performance) | Diagnosis condition | TCM power supply voltage: More than 11 V |
| Signal | Transmission range switch signal | ||
| Threshold | All range signals stay OFF | ||
| Diagnosis delay time | Maintained for 30 seconds | ||
POSSIBLE CAUSE
- Harness or connector (Open circuit between ignition switch and transmission range switch/open circuit between transmission range switch and TCM)
- Transmission range switch
- Electric shift control module
- Shift actuator
Harness or connector (CAN communication line is error)
FAIL-SAFE
- Shift position indicator on combination meter is not displayed
- Selector shock is large
- Start is slow
- Acceleration is slow
- Lock-up is not performed