LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2024 >> QX55 Essential >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (Direct Adaptive Steering) (DTC/Circuit Diagnosis) (2 Of 2) >> DTC/Circuit Diagnosis >> C13F0-00 INCOMP DAST Calibration >> DAST 2 >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

  1. PERFORM CALIBRATION 
    1. Perform the working including "DAST CALIBRATION (MODE1)" performed just before from the first. Refer to Work Procedure .

    >>

    GO TO 2.

  2. PERFORM SELF-DIAGNOSIS 
    1. SYMBOL CONSULT
      1. Ignition switch ON.
      2. Erase "Self Diagnostic Result" mode of "DAST 2".
      3. Ignition switch OFF and wait for at least 10 seconds.
      4. Ignition switch ON.
      5. Select "Self Diagnostic Result" mode of "DAST 2".

    Is DTC "C13F0-00" detected?

    YES>>

    Replace steering angle sub control module. Refer to Removal and Installation .

    NO>>

    Inspection End.