DTC Description

DTC DETECTION LOGIC

DTC No.	CONSULT screen terms(Trouble diagnosis content)	DTC detected condition
C13E1-00	STEERING CLUTCH(Steering clutch)	Diagnosis condition	When engine running
		Signal (terminal)	-
		Threshold	Malfunction of steering clutch is detected.
		Diagnosis delay time	1 seconds or more

POSSIBLE CAUSE

FAIL-SAFE

MODE 2

NOTE:

For details of fail-safe mode, refer to Fail-safe .

DTC CONFIRMATION PROCEDURE

PRECONDITIONING
1. If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.
>>

GO TO 2.

CHECK DATA MONITOR

CONSULT

Check that the value is within standard value while steering the steering wheel.

Monitor item	Standard value(Approx.)
TORQUE SEN MAIN 1	-0.9 N.m ≤ TORQUE SEN MAIN 1 ≤ 0.9 N.m

Is the inspection result normal?

YES>>

Steering clutch protection function is active temporarily by overloading the steering wheel. This is not system malfunction.

NO>>

Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .