Additional Service When Replacing Control Unit (A/C Auto Amp.): Description

Perform the following operations when replacing A/C auto amp. (For details, refer to Work Procedure .)

BEFORE REPLACEMENT 

When replacing A/C auto amp., save or print the current vehicle specification with CONSULT "Before Replace ECU" function of "Read / Write Configuration" before replacement.

NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing A/C auto amp. to write the vehicle specification.

AFTER REPLACEMENT 

When replacing A/C auto amp., always perform "Manual Configuration" or "Before Replace ECU" of "Read / Write Configuration" with CONSULT as vehicle specification is not written on new A/C auto amp.