Foot Position Setting Trimmer
DESCRIPTION
In FOOT mode, the air blowing to DEF can change ON/OFF.
HOW TO SET
CONSULT Select "BLOW SET" in "Work support" mode of "HVAC".
| Work support items | Display | Defroster door position | |
|---|---|---|---|
| Auto control | Manual control | ||
| BLOW SET | Mode1 | OPEN | CLOSE |
| Mode2 (initial status) | OPEN | OPEN | |
| Mode3 | CLOSE | OPEN | |
| Mode4 | CLOSE | CLOSE | |
NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of the discharge air mix ratio in FOOT mode may be cancelled.