Combination Meter: Fail-Safe
FAIL-SAFE
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
| Function | Specifications | |
|---|---|---|
| Speedometer | Reset to zero by suspending communication. | |
| Tachometer | ||
| Engine coolant temperature gauge | ||
| Illumination control | When suspending communication, changes to nighttime mode. | |
| Information display | Odo/trip meter | An indicated value is maintained at communications blackout. |
| Shift position indicator | The display turns OFF by suspending communication. | |
| Warning messages | The display turns OFF by suspending communication. | |
| Buzzer | The buzzer turns OFF by suspending communication. | |
| Warning lamp/indicator lamp | ABS warning lamp | The lamp turns ON by suspending communication. |
| Slip indicator lamp | ||
| Brake warning lamp | ||
| FEB warning lamp | ||
| RAB warning lamp | ||
| Malfunction indicator lamp | ||
| VDC OFF indicator lamp | ||
| EPS warning lamp | ||
| Low tire pressure warning lamp | The lamp blinking caused by suspending communication. | |
| High beam indicator lamp | The lamp turns OFF by suspending communication. | |
| Turn signal indicator lamp | ||
| Master warning lamp | ||
| Front fog lamp indicator lamp (if equipped) | ||
| Lane departure warning | ||
| High beam assist indicator lamp | ||
| ECO drive indicator lamp (if equipped) | ||
| Tail lamp indicator lamp | ||
| Air bag warning lamp | The lamp turns off when disconnected. | |
| Charge warning lamp | ||
| Seat belt warning lamp | ||
| Security indicator lamp | ||