DTC Description
DTC DETECTION LOGIC
| DTC | Display Item(Trouble diagnosis content) | Malfunction detected condition | ||
|---|---|---|---|---|
| U1010-49 | CONTROL UNIT (CAN) (Control unit [CAN communication]) | Diagnosis condition |
|
|
| Signal (terminal) | - | |||
| Threshold | When detecting error during the initial diagnosis of CAN controller of ABS actuator and electric unit (control unit). | |||
| Diagnosis delay time | 2 seconds or less | |||
POSSIBLE CAUSE
NOTE:
Confirm if DTC is PAST or CRNT. If DTC is CRNT, proceed with Diagnosis Procedure. If DTC is PAST, clear the DTC. Do not replace the ABS actuator and electric unit (control unit) for a PAST DTC.
| PAST DTC | CRNT DTC |
|---|---|
|
ABS actuator and electric unit (control unit) |
FAIL-SAFE
The following systems are suspended:
- VDC function
- TCS function
- EBD function
- ABS function
- Brake assist function
- Hill start assist function
- Brake force distribution function