DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen item(Trouble diagnosis content) | DTC detected condition | |
|---|---|---|---|
| C1154- 01 | PNP POSI SIG(PNP position signal) | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | Shift position signal | ||
| Threshold | When a malfunction is detected in TCM system. | ||
| Diagnosis delay time | 2 seconds | ||
POSSIBLE CAUSE
NOTE:
Confirm if DTC is PAST or CRNT. If DTC is CRNT, proceed with Diagnosis Procedure. If DTC is PAST, clear the DTC. Do not replace the ABS actuator and electric unit (control unit) for a PAST DTC.
| PAST DTC | CRNT DTC |
|---|---|
|
|
FAIL-SAFE
The following systems are suspended:
- VDC function
- TCS function
- Hill start assist function
- Brake force distribution function