DTC Description
DTC DETECTION LOGIC
| DTC No. | Display Item(Trouble diagnosis content) | DTC detected condition | |
|---|---|---|---|
| C111D-1C | PUMP MOTOR(Pump motor and motor relay) | Diagnosis condition | When ignition switch ON. |
| Signal (terminal) | - | ||
| Threshold | When a malfunction is detected in motor or motor relay. | ||
| Diagnosis delay time | 1 second or less | ||
POSSIBLE CAUSE
NOTE:
Confirm if DTC is PAST or CRNT. If DTC is CRNT, proceed with Diagnosis Procedure. If DTC is PAST, clear the DTC. Do not replace the ABS actuator and electric unit (control unit) for a PAST DTC.
| PAST DTC | CRNT DTC |
|---|---|
|
|
FAIL-SAFE
The following systems are suspended:
- VDC function
- TCS function
- ABS function
- Brake assist function
- Hill start assist function
- Brake force distribution function