DTC Description

DTC DETECTION LOGIC

DTC No.	CONSULT screen item(Trouble diagnosis content)	DTC detected condition
C1118-93	4WD SYSTEM(4WD system)	Diagnosis condition	When ignition switch is ON. When power supply voltage is normal.
		Signal (terminal)	Stop lamp switch signal
		Threshold	When a malfunction is detected in AWD system.
		Diagnosis delay time	1 seconds or more

POSSIBLE CAUSE

NOTE:

Confirm if DTC is PAST or CRNT. If DTC is CRNT, proceed with Diagnosis Procedure. If DTC is PAST, clear the DTC. Do not replace the ABS actuator and electric unit (control unit) for a PAST DTC.

PAST DTC	CRNT DTC
Harness or connector ABS actuator and electric unit (control unit) power supply system Fuse Fusible link Battery CAN communication line	Transfer control unit ABS actuator and electric unit (control unit) CAN communication line

FAIL-SAFE

The following systems are suspended:

VDC function
TCS function
Brake assist function
Hill start assist function
Brake force distribution function